Health and Safety Training and Courses

Health and Safety Representative (Level 1)

The prime functions of the Health and Safety Representative is to identify hazards, be aware of all potential risks and hazards at the workplace and to ensure the continued health and safety of self and colleagues.

This course covers a range of 6 modules: legal knowledge, the difference between occupational health and occupational safety, incident prevention, hazard identification, incident investigation and conducting meetings.

In these modules we take a look at various concepts such as occupational hygiene, the measuring tools of safety, acceptable levels exposure as well as business elements and identifying the spectrum of losses.

Best Selling Health and Safety Training course

This course is designed around four modules covering topics like managing the scene of an emergency, the basic human anatomy and physiology as well as the primary and secondary survey.

(Unit Standard: 259622 – NQF Level: 2 – Credits: 3)

Is this course accredited?

Yes

With which SETA’s?

(HWSETA)

For how long is the certificate valid?

2 years

What is the duration of the course?

8 hours (1 x day)

What is the MAX amount of people that can attend?

20

Can I do a refresher course in 1 x Day or do I need to do the whole course again?

The course duration will stay the same regardless of Refresher or New.

How much does the course cost?

Course costs are based on the number of people attending, for an accurate quote please contact us.

Where does the course take place?

We can train you wherever you are.

When can the course be run?

Our aim is to teach these first aid skills to you when it suits YOU! We run the course 7 days a week! That’s right, Monday through to Sunday.

When can we expect to receive our certificates?

Certificates will be issued 2-3 days after the training took place. Once issued we will send you the scanned and original copies. If payment is outstanding we will only send it out after payment was received.

Target: Appointed candidate Health & Safety Representative
Duration: 8 hours
Description: Comprehensive Hazard Identification & Incident Prevention
Legislation: Occupational Health & Safety Act of 1993

Enquire

Incident Investigation (Level 2)

The process of hazard and/or incident identification and risk assessment is taught to ensure that learners apply health and safety and environmental principles and procedures in the workplace. In this way they are equipped to contribute to a safer work environment and can thus assist management in identifying potential hazards.

Topics that will be discussed cover principles of the act, definitions and an understanding of the specific requirements pertaining to continuous hazard identification and risk assessment.

The course is designed to enable learners to meet minimum workplace standards and to initiate and remedial actions.

(Unit Standard: 259617 – NQF Level: 2 – Credits: 3) – Conduct an investigation into workplace safety, health and environmental incidents

This course is designed around four modules covering topics like managing the scene of an emergency, the basic human anatomy and physiology as well as the primary and secondary survey.

Is this course accredited?

Yes

With which SETA’s?

(HWSETA)

For how long is the certificate valid?

2 years

What is the duration of the course?

8 hours (1 x day)

What is the MAX amount of people that can attend?

20

Can I do a refresher course in 1 x Day or do I need to do the whole course again?

The course duration will stay the same regardless of Refresher or New.

How much does the course cost?

Course costs are based on the number of people attending, for an accurate quote please contact us.

Where does the course take place?

We can train you wherever you are! We can come to your office or you can come to our offices in Centurion. The course can also be done online.

When can the course be run?

Our aim is to teach these first aid skills to you when it suits YOU! We run the course 7 days a week! That’s right, Monday through to Sunday.

When can we expect to receive our certificates?

Certificates will be issued 2-3 days after the training took place. Once issued we will send you the scanned and original copies. If payment is outstanding we will only send it out after payment was received.

Target: Appointed/Candidate Health & Safety Representatives
Duration: 8 hours
Description: Comprehensive Hazard Identification & Incident Prevention
Legislation: Occupational Health & Safety Act of 1993

Enquire

Hazard Identification and Risk Assessment (H.I.R.A) (Level 3)

This course covers topics such as safety, workplace inspections, and principals of the act. It is designed to enable learners to ensure that safety, health and environmental principals and procedures are applied effectively in the workplace.

We will discuss topics such as the principals of the act, potential risks and hazards as well as the proper identification of risks and hazards.

This course is designed around four modules covering topics like managing the scene of an emergency, the basic human anatomy and physiology as well as the primary and secondary survey.

(Unit Standard: 259624 – NQF Level: 2 – Credits: 4) – Control workplace hazards and

risks

Is this course accredited?

Yes

With which SETA’s?

(HWSETA)

For how long is the certificate valid?

2 years

What is the duration of the course?

8 hours (1 x day)

What is the MAX amount of people that can attend?

20

Can I do a refresher course in 1 x Day or do I need to do the whole course again?

The course duration will stay the same regardless of Refresher or New.

How much does the course cost?

Course costs are based on the number of people attending, for an accurate quote please contact us.

Where does the course take place?

We can train you wherever you are! We can come to your office or you can come to our offices in Centurion. The course can also be done online.

When can the course be run?

Our aim is to teach these first aid skills to you when it suits YOU! We run the course 7 days a week! That’s right, Monday through to Sunday.

When can we expect to receive our certificates?

Certificates will be issued 2-3 days after the training took place. Once issued we will send you the scanned and original copies. If payment is outstanding we will only send it out after payment was received.

Target: All Staff
Duration: 02 Days
Description: Comprehensive Hazard Identification & Incident Prevention
Legislation: Occupational Health and Safety Act, 1993

Enquire

O.H.A.S.A

Demonstrating knowledge and application of the O.H.S Act is an integral part of being a Safety Officer, since this is the person responsible for Health and Safety activities. Such an individual needs to be competent in all matters relating to Health and Safety and should adhere to the standards of the O.H.S.A at all times.

In this course we work through a set of 16 modules that range from legal knowledge and duties and responsibilities of the Safety Officer to a concise investigation of the O.H.S Act itself.

Other modules covered include, but are not limited to, incident and accident prevention, philosophy of accidents, management systems, hazard identification analysis and risk assessment.

Attention is also paid to health and safety policies and general safety applications.

 

 

This course is designed around four modules covering topics like managing the scene of an emergency, the basic human anatomy and physiology as well as the primary and secondary survey.

This course is designed around four modules covering topics like managing the scene of an emergency, the basic human anatomy and physiology as well as the primary and secondary survey.

OHASA: (Unit Standard: 244288 – NQF Level: 5 – Credits: 8)

Is this course accredited?

Yes

With which SETA’s?

(HWSETA)

For how long is the certificate valid?

2 years

What is the duration of the course?

8 hours (1 x day)

What is the MAX amount of people that can attend?

20

Can I do a refresher course in 1 x Day or do I need to do the whole course again?

The course duration will stay the same regardless of Refresher or New.

How much does the course cost?

Course costs are based on the number of people attending, for an accurate quote please contact us.

Where does the course take place?

We can train you wherever you are! We can come to your office or you can come to our offices in Centurion. The course can also be done online.

When can the course be run?

Our aim is to teach these first aid skills to you when it suits YOU! We run the course 7 days a week! That’s right, Monday through to Sunday.

When can we expect to receive our certificates?

Certificates will be issued 2-3 days after the training took place. Once issued we will send you the scanned and original copies. If payment is outstanding we will only send it out after payment was received.

Target: Management, Supervisors, Safety Reps
Duration: 8 hours
Description: Comprehensive Overview of Employer and Employee
Legislation: Occupational Health & Safety Act of 1993

Enquire

General Health and Safety

General Health and Safety is a course designed to ultimately enable the learner to explain basic health and safety principles in and around the workplace.

The course is in accordance with UNIT STANDARD: 259639.

A span of 7 modules will cover topics such as legal knowledge, lesislation, personal health and safety equipment, reporting of incidents, notices and signs (as well as colour coding) and emergency procedues.

Target: All employees, contractors and on-site workers
Duration: 4 hours
Description: Introduction to General Health & Safety Awareness
Legislation: Occupational Health & Safety Act of 1993

Enquire

LAWREG

The course offers a 10-day learning experience covering a number of topics that fall under Safety Management Training in an extensive study of the relevant act and regulations.

Day 1 and 2 will focus on an overview of the O.H.S Act in terms of its development, principle and rights to name but a few aspects.

Day 3 and 4 lends itself to General Administrative Regulations from definitions to incident reporting and documentation. We also focus on General Safety Regulations such as, for example, first aid requirements and supervision of construction work.

Day 5 and 6 gives us a chance to look at Environmental Regulations and General Machinery Regulations during which time we’ll address topics like lighting, ventilation, precaution against flooding and/or fire as well as safeguarding and operation of machinery.

On days 7 and 8 we look at Electrical Machinery and Installations as well as Driven Machinery Regulations, Environmental Regulations and General Machinery Regulations. Finally on days 9 and 10 we will focus on Facilities Regulations, Vessels Under Pressure Regulations and Hazardous Chemical Regulations.

Completion of the course consists of an open-book exam.

Target: Safety Management, Risk/Loss Control Officers, General Management
Duration: 40 hours (1 week)
Description: Extensive Study of the Act and the Regulations
Legislation: Occupational Health & Safety Act of 1993

Enquire

Legal Liability

This course addresses Legal Liability within the context of the Occupational Health and Safety Act, 1993.

Many people mistakenly assume that the only penalties that could be imposed on them are those that are stipulated in section 38 of the O.H.S Act, 1993. The fact of the matter is, however, that Common Law is, to some extent, always linked to any form of legislation.

Knowing the the law and being aware of what could happen is by far better than being caught unawares. Employees who understand the different liabilities and what they entail are better equipped to implement reasonable measures to avoid or at least minimize legal accountability.

Topics covered will include, but are not limited to, Common Law and Legislation, Criminal Liability as well as Civil or Private Liability and Principles of the O.H.S Act, 1993.

We will also take a look at general duties of employees to their employer and general duties of the employee at work.

(Unit Standard: 120344 – NQF Level: 4 – Credits: 4)

This course is designed around four modules covering topics like managing the scene of an emergency, the basic human anatomy and physiology as well as the primary and secondary survey.

Is this course accredited?

Yes

With which SETA’s?

(HWSETA)

For how long is the certificate valid?

2 years

What is the duration of the course?

8 hours (1 x day)

What is the MAX amount of people that can attend?

20

Can I do a refresher course in 1 x Day or do I need to do the whole course again?

The course duration will stay the same regardless of Refresher or New.

How much does the course cost?

Course costs are based on the number of people attending, for an accurate quote please contact us.

Where does the course take place?

We can train you wherever you are! We can come to your office or you can come to our offices in Centurion. The course can also be done online.

When can the course be run?

Our aim is to teach these first aid skills to you when it suits YOU! We run the course 7 days a week! That’s right, Monday through to Sunday.

When can we expect to receive our certificates?

Certificates will be issued 2-3 days after the training took place. Once issued we will send you the scanned and original copies. If payment is outstanding we will only send it out after payment was received.

Target: All Staff
Duration: 01 Day
Description: Relationship between common law and act
Legislation: Occupational Health and Safety Act, 1993

Enquire

Stacking & Storage Regulations

Storage of goods often involve some form or another of stacking. If done correctly, this is a very economic way of utilizing the space available. Doing it the wrong way, on the other hand, often results in injury.

Whatever the nature of your business, the likelihood that there will be a system of storage involved creates the need for training in this particular skill. This course is designed to facilitate the learning of various skills needed to use safe and effective methods of storage and is aimed at both employee and employer.

We will cover a number of topics carefully spread out over 27 modules that will highlight various aspects involved with stacking and storage in accordance with current Occupational Health and Safety legislation.

This course is designed around four modules covering topics like managing the scene of an emergency, the basic human anatomy and physiology as well as the primary and secondary survey.

(Unit Standard: 8139 – NQF Level: 1 – Credits: 4) – perform basic stacking & storage procedures

Is this course accredited?

Yes

With which SETA’s?

(TETA)

How much does the course cost?

Course costs are based on the number of people attending, for an accurate quote please contact us.

Where does the course take place?

We can train you wherever you are.

When can the course be run?

Our aim is to teach these first aid skills to you when it suits YOU! We run the course 7 days a week! That’s right, Monday through to Sunday.

When can we expect to receive our certificates?

Certificates for the stacking and storage course will be issued 2-3 days after the training took place. Once issued we will send you the scanned and original copies. If payment is outstanding we will only send it out after payment was received.

For how long is the certificate valid?

2 years

What is the duration of the course?

8 hours (1 x day)

What is the MAX amount of people that can attend?

20

Can I do a refresher course or do I need to do the whole course again?

The course duration will stay the same regardless of Refresher or New.

Target: Management, Forklift & Crane Operators, Staff responsible for Stacking & Storage
Duration: 04 hours
Description: Legal requirements, Layout, Grouping, Housekeeping, etc.
Legislation: Occupational Health & Safety Act of 1993

Enquire

Confined Spaces

The risk associated with working in confined spaces can often be more hazardous than regular working situations. To minimize this risk it is necessary to implement a Confined Space Hazard Assessment and Control Program.

This course serves the purpose of enabling the learner to implement safety measures relating to work in confined spaces.

A set of 10 modules will cover topics such as defining a confined space, understanding why work in such a space is more hazardous than in other, more easily accessible spaces and how to effectively control hazards in confined spaces.

We will also take a look at how to maintain air quality and prevent fire explosions, among other aspects.

Target: All staff
Duration: 04 Hours
Description: Confined Space Hazard Assessment and Control Program.
Legislation: Occupational Health and Safety Act, 1993

Enquire

Supervisory Safety

It is the responsibility of the supervisor to recognise and identify factors with high accident potential in the workplace. It is therefore important for a supervisor to have a thorough understanding of Health, Safety, Welfare and Environmental issues. Another important element of this role is being aware of the legal requirements relevant to their work activities.

This course is designed to cover, for example, topics like safe systems at work, hazard identification and risk assessment. We will also be looking at the various duties of a supervisor and intervention skills and much more.

(Unit Standard: 113845  – NQF Level: 3 – Credits: 10) – supervisor training

What does the course entail?

General shop/work area safety, electrical installations and equipment, machinery, plumbing maintenance, carpentry and structural maintenance, welding and metal fabrication, refrigeration and air conditioning maintenance, heating systems and boiler plant maintenance, painting operations, landscape/grounds maintenance

Who should do the training?

All the employees that is appointed as supervisors in a workplace.

How much does the course cost?

Course costs are based on the number of people attending, for an accurate quote please contact us.

Where does the course take place?

We can train you wherever you are!

When can the course be run?

Our aim is to teach these first aid skills to you when it suits YOU! We run the course 7 days a week! That’s right, Monday through to Sunday.

When can we expect to receive our certificates?

Certificates will be issued 2-3 days after the training took place. Once issued we will send you the scanned and original copies. If payment is outstanding we will only send it out after payment was received.

For how long is the certificate valid?

2 years

What is the duration of the course?

8 hours (1 x day)

What is the MAX amount of people that can attend?

20

Can I do a refresher course or do I need to do the whole course again?

The supervisor training course duration will stay the same regardless of Refresher or New.

Target: Supervisors
Duration:
Description: Supervision of Construction Processes
Legislation: Occupational Health and Safety Act, 1993

Enquire

Hand Tools

This course focuses on the proper use of handheld tools.

(Unit Standard: 12877 – NQF Level: 1 – Credits: 4) – use and maintain hand tools on a construction site

What does the course entail?

Sandpaper / Glass paper, Bricklayer Tool Kit, Clamps, Handsaws, Hammers, Drills, Grinders, Plunge Routers, Router Cutters, Power Saw, Chain saw, Heat Guns, Ladders, Power Tools, Spanners and Wenches, Safety

Who should do the training?

Everyone that works with hand tools on a daily or regular basis.

How much does the course cost?

Course costs are based on the number of people attending, for an accurate quote please contact us.

Where does the course take place?

We can train you wherever you are!

When can the course be run?

Our aim is to teach these first aid skills to you when it suits YOU! We run the course 7 days a week! That’s right, Monday through to Sunday.

When can we expect to receive our certificates?

Certificates will be issued 2-3 days after the training took place. Once issued we will send you the scanned and original copies. If payment is outstanding we will only send it out after payment was received.

For how long is the certificate valid?

2 years

What is the duration of the course?

8 hours (1 x day)

What is the MAX amount of people that can attend?

20

Can I do a refresher course or do I need to do the whole course again?

The hand tools course duration will stay the same regardless of Refresher or New.

Target:
Duration:
Description:
Legislation:

Enquire